Monday, September 4, 2017

Fabulous Air-Filled Bubble Garland by Cam Woody, CBA.

Air-Filled Bubble Garland by Cam Woody, CBA of Pioneer® Balloon Company.

Have you tried out the new 12" Air-Filled Bubbles yet? These balloons are all the fun of a Bubble Balloon® but in a smaller size! Sold in packs of 10, they are perfect for air-filled store displays, point-of-sale purchases, and can be used for fun decor accents. 

Follow these simple steps to create perfect Air Bubbles.

Step 1. Remove Bubble from foil packaging. If you do not intend to inflate all 10 Air Bubbles at the same time, I recommend that you reseal the packet using your heat sealer or place into a zip-lock bag to prevent the Bubbles from drying out.


Step 2. Inflate Air Bubble using a hand pump until the balloon is fully inflated and has no wrinkles at the edges.


Step 3. Using a heat sealer, seal the Bubble. I like to start close to the opening of the balloon, rather than higher nearer the actual balloon. This gives me the opportunity to try again if it fails the first time. The heat sealer needs to be set to a low temperature. I recommend starting on setting 2. You may need to adjust slightly, either way depending on your own heat sealer.


Watch the short video below to see how to inflate and heat seal the 12" Air-Bubble.




If you do not have a heat sealer, you can still work with these wonderful balloons! Simply inflate an 11" latex balloon inside! The video below will show you how.



Here is a fabulous idea from Cam Woody, CBA, who shows us how to create this wonderful air-filled Bubble Garland that will last a very long time! Perfect for window displays, long lasting decor, and outside decor too!




  • Air-inflate and heat seal all the Bubble balloons that you need for your Garland.
  • Roll up the neck of each of the Bubble balloons with curling ribbon, then curl gently to create soft curls.
  • Connect each Bubble together using a small piece of Clik-Clik™ Stretchy Balloon Tape. This tape is exceptionally strong and will hold the balloons together really well. 



  • Create connection points at each end of the Garland, once again using Stretchy Balloon Tape and ribbon which will enable you to position your Garland.


I love this Garland. It's fun, strong and very long-lasting! Congratulations Cam on an awesome design idea! 

12" Bubbles are available in a variety of different prints, so you can easily adapt the Garland to suit different occasions or themes. Check out the range by clicking HERE.

Happy Ballooning!


Sue
www.suebowler.com




3 comments:

lettysevy said...

This blog is truly useful to convey overhauled instructive undertakings over web which is truly examination. I discovered one fruitful case of this truth through this blog. I will utilize such data now.
บับเบิ้ล

Unknown said...

I am thankful for this blog to gave me much knowledge regarding my area of work. I also want to make some addition on this platform which must be in knowledge of people who really in need. Thanks.
air bubble

aarjav.asinfo said...

Nice post....thanks for sharing.Shree Bankey Bihariji Packaging